Boards, covers and the spec to make it work.

One high-spec board system, two cover options, two retrofit floor systems — and a technical pack with every order.

⌁

Core Product

Wet UFH board system

Pre-routed boards (1200 × 600 × 21 mm, 12–15 kg) laid directly onto solid insulated ground floors or upper floors. Designed for new builds and renovations.

We design the board layout to match each room's required temperature, so your installer simply copies the pattern.

✓

Heat-pump friendly: flow temps 28–35°C

✓

48 N/mm² compressive strength (concrete-grade)

✓

1501 kJ/m³·K heat storage — fast warm-up

✓

Δt of only 1–2°C for max efficiency

✓

Min 25–32% energy saving vs other wet UFH

✓

Suitable for residential and commercial

♨

Choose Your Finish

Two cover options

Dry cover board system — fits straight over the pipes. Floor is walkable immediately, no commissioning delay.

Special compound cover — a 2–4 mm pour that covers board and pipes in one pass. Typically cures in 2–3 days.

✓

Works with tiles, LVT, laminate and engineered wood

✓

Heat output charts supplied for both options

✓

Layouts engineered around your final floor finish

✓

Supply only — your installer fits the cover

Real numbers, by flow temperature and floor finish

All figures in W/m². Use these to size the system to each room.

Dry cover board system

Flow	Tiles	LVT	Laminate	Eng. Wood
25°C	34.2	31.32	29.52	27.72
28°C	57.95	53.07	50.02	46.97
32°C	90.25	82.65	77.9	73.15
35°C	113	103	97.58	91.63

Special compound cover (2–4 mm)

Flow	Tiles	LVT	Laminate	Eng. Wood
25°C	40.8	37.41	35.26	33.11
28°C	69.35	63.51	59.86	56
32°C	105	96.57	91.02	85.47
35°C	133	121	114	107

Higher outputs achieved with the compound cover. Lower-temp performance means heat pumps stay in their COP sweet spot.

Suspended ground floor systems

For renovation contracts where the old floor is damp, rotten or simply finished — we supply two suspended ground floor systems that replace the old joist-and-board floor with a warm, dry, draught-free deck.

No more wet rot, dry rot or wood rot
Components guaranteed for 50 years
Excellent U-values — saves ~20% energy
Ready for any decorative floor finish
Perfect for UFH or radiators
Install in roughly two days — walkable straight away
Strong, lightweight, meets load-bearing standards
Concrete finish option also available